If you have any feedback on how we can make our new website better please do contact us and we would like to hear from you. 
 

Types of Wet Room Shower Trays

The purpose of a wet room shower tray is to ensure that water from your wet room falls away down the drain. Each wet room tray range has a different feature to enable you to install your wet room in the location of your choice. Some wet room shower trays are designed to be installed into floor boards between joists with a slight fall towards the centre to drain water away. Other wet room trays allow you to build a showering area up higher than your bathroom floor - by providing a grid template for you to fill with screed to create the required gradient for water to fall down the drain.

Most Wet Room Tray manufacturers provide different sizes of wet room tray to suit almost any installation. Square Wet Room Trays and Rectangular Wet Room Trays are the most common. Wetroom trays can be purchased as Concrete floor wet room trays or timber floor wet room trays depending on the manufacturer.

Installing a Wet Room Shower Tray

Typically, before you install a wet room shower tray the area for your wet room must be prepared. This preperation will differ depending on the type of wet room tray you have decided to install. However, before you wetroom tray can be installed it is important to fully waterproof your showering area with wet room waterproofing. Once you have installed your wet room shower tray on top, you can then install the waste and your surface of choice. Most people will want to tile on top of the wet room shower tray.

Wet Room Shower Tray Manufacturers

Wet Room Trays are produced by many different companies, but LIVING STYLE can supply you the following:
  • Showerstone Wet Room Shower Trays
  • Impey Aquadec Wet Room Shower Trays
  • Impey Level Grade Wet Room Shower Trays
  • Bette Steel Wet Room Shower Trays

Investigate further below the benefits that each style of Wet Room Tray brings to your wet room installation
 

Showerstone Wet Room Waterproofing Kit

 
Once you have successfully installed the Showerstone Wet Room Tray (or any other Wet Room Tray) - these waterproofing kits are essential to ensure that your installation is completely waterproof before tiling your shower area.

Product Features

  • Designed For the Marmox Showerstone Wet Room Tray
  • Principle will work on other Wet Room Tray Installations
  • Easy to Apply

Each Waterproofing Kit Includes...

  • Tanking Membrane 1000mm Wide (Choice of 5sqm or 10sqm)
  • 1 Litre of Primer
  • 15m Roll of Reinforcing Tape
  • 1 x Cartridge of Joint Sealant
  • 2 Internal Corners
  • Roller
  • Full Installation Instructions

Installation Instructions

Waterproofing Instructions





 






 
 



 



 





 


 

  Home Improvement specialists,cheap showroom kitchens at trade prices ,loft conversions,barn conversions,loft storage,wet rooms,extensions,renovations,bathrooms,tiling,heating systems,rewires,roofing,windows, loft space,garage conversions for Newcastle,Whitley Bay,Blyth,Cramlington,Chester le Street, Gateshead,Ashington, Jesmond, Ponteland,gosforth,kingston park,north shields,forest hall,darras hall,heaton,tynemouth,tyneside,whickham,northumberland,durham,chaple park approved and recommended through out the uk
APPROVED & RECOMMENDED

  Site Map